Product ID:AQUAPON W/B COMPONENT B 98-98
MSDS Date:02/22/1996
FSC:8010
NIIN:00N073149
Kit Part:Y
MSDS Number: CBZRB

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 30-40%

OSHA PEL N/K

ACGIH TLV: N/K

ETHANOL, 2-PROPOXY-; (2-PROPOXYETHANOL)

CAS: 2807-30-9

RTECS: KM2800000

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K

ONLY THE SPILLED MATERIAL AND THE ABSORBENT

RTECS: 9999999ZZ

DETERMINE TYPE OF AIRBORNE CONTAMINANTS AGAINST

RTECS: 9999999ZZ

THE LEL BELOW THE STATED LIMIT, AND TO REMOVE

RTECS: 9999999ZZ

NEOPRENE RUB, NITRILE

RTECS: 9999999ZZ

HAVE BEEN DONE ON PROT CLTHG FOR THIS PROD.

RTECS: 9999999ZZ

CONT W/THIS PROD. FOR FREQUENT CONT/TOTAL IMMERSION,

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL IF SWALLOWED.
EYE: SEV IRRIT. SKIN: MAY CAUSE SLIGHT IRRIT. MAY BE ABSORBED THRU
SKIN. PRLNG/RPTD CONT MAY CAUSE ALLERGIC SKIN RXN. INHAL: VAP &
SPRAY MIST HARMFUL IF INHALED. R PTD EXPOS TO HIGH VAP CONCS MAY
CAUSE IRRIT OF RESP SYS & PERM BRAIN & NERV SYS DMG. CHRONIC: AVOID
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: LONG TERM & RPTD CONT. CONTAINS AN
ETHYLENE SERIES GLYCOL ETHER &/ACETATE WHICH HAS BEEN SHOWN TO
CAUSE ADVERSE EFTS ON THE KIDNEYS, LIVER, BLOOD AND/OR
BLOOD-FORMING TISSUE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMIT. GENTLY WIPE OUT INSIDE MOUTH TO
REMOVE ANY RESIDUAL MATL. EYE: REMOVE CONT LENSES & FLUSH IMMED
W/GENTLE STREAM OF LUKE WARM WATER FOR AT LEAST 15 MIN . SKIN:
FLUSH IMMED W/PLENTY OF WATER FOR AT LEAST 15 MIN FOLLOWED BY
WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR. APPLY ARTF RESP
& OTHER SUPPORTIVE MEASURES AS REQUIRED. IF INGEST, ANY TYPE OF
OVEREXP/ (SUP DAT)

Extinguishing Media:USE EXTINGUISHERS APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY MAY BE USED TO COOL
CLSD CONTRS EXPOSED TO EXTREME HEAT. (SUP DAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO THE BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME
HEAT.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP, SKIN, & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAND, VERMICULITE/OTHER
NON-COMBUST ABSORB MATL & PLACE IN CLEAN, EMPTY CONTRS FOR DISP.
(ING 3)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
SYSTEM, READ THE MSDS FOR THE OTHER COMPONENT OR COMPONENTS BEFORE
BLENDING AS THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF
ITS PARTS.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHST/FRESH AIR ENTRY. NIOSH APPRVD (TC-23C) AIR
PURIFYING/AIR SUPPLIED (TC-19C) RESPS MAY ALSO REDUCE EXPOS. READ
RESP MFR'S INSTRUCTIONS & LITERATURE CAREFULLY TO (ING 4)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMITS, (ING 5)
Protective Gloves:NEOPRENE RUBBER, NITRILE RUBBER/LATEX.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR PROT CLTHG TO PVNT SKIN CONT. APRON & GLOVES SHOULD BE (ING 6)
Work Hygienic Practices:CLEAN CONTAMINATED CLOTHING AND SHOES.
Supplemental Safety and Health
FIRE FIGHT PROC: IF WATER IS USED, FOG NOZZ ARE PREF. HAZ DECOMP PROD:
MOLECULAR WT POLYMER FRACTIONS. EXTREME HEAT INCLUDES, BUT IS NOT
LIMITED TO, FLAME CUTTING, BRAZING, & WELDING. FIRST AID PROC:
SYMPS OF OVEREXP OCCUR DURING/FOLLOWINGUSE OF THIS PROD, CONT POIS
CTL CTR, EMER ROOM/MD IMMED. HAVE MSDS INFO AVAIL.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17.2
Vapor Density:HVR/AIR
Spec Gravity:1.072
Evaporation Rate & Reference:34 (BUTYL ACETATE=100)
Solubility in Water:60.3%
Appearance and Odor:VISCOUS LIQ, W/ODOR CHARACT OF THE CHEM FAMILY &
ANY SOLVS LISTD IN INGS SECTIO
Percent Volatiles by Volume:65.33

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE THE FOLLOWING HAZ DECOMP
PRODS WHEN EXPOSED TO EXTREME HEAT: CARBON MONOXIDE, CARBON
DIOXIDE, LOWER (SUP DAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.